From 0-10V dimming gear to Decora Smart wifi switches and occupancy-ready scene controllers, Leviton connects the wiring-device layer and the lighting-control layer so facilities teams stop piecing together mixed-vendor retrofits.
Leviton tracks the same signals specification teams track: watts saved, commissioning hours shortened, and device families kept consistent across sites.
Reduction in lighting energy once occupancy, daylight, and scene logic run together on the connected stack.
Average reduction in wireless commissioning time when a Leviton-family gateway provisions devices as a single group.
One Decora Smart and My Leviton logic across wifi dimmers, motion sensors, outlets, and scene controllers.
Driver-plus-fixture families specified for long-horizon lumen maintenance on multi-site contracts.
Five category backbones keep wiring devices, drivers, sensors, and controls inside one specification story.
Integrated connected fixtures with on-board drivers, presence sensing, and My Leviton provisioning baked in rather than bolted on.
Commercial-grade troffers and downlights tuned for 4000 K office lighting, with 0-10V dimming and emergency-backup compatibility.
IP65 high-bay and flood families with 145 lm/W luminaire efficacy for warehouse zones and industrial envelopes.
Drivers, wifi dimmers, scene controllers, and 0-10V dimmer leviton interfaces that land inside a shared commissioning tool.
Parking, perimeter, and campus fixtures with cutoff distribution control and wireless scheduling for public-site accountability.
Receptacles, switches, and tamper-resistant outlets kept in the same product-family logic as Leviton motion sensor switches.
Connected lighting gets useful when the application team, the MEP engineer, and the facility owner share one toolset across floors and sites.
Zone-by-zone occupancy logic with Decora Smart wifi dimmers, scene controllers, and daylight harvesting across open floors.
Classroom control groups, corridor scheduling, and exterior pathway lighting tied to one commissioning record.
Nursing stations, clinical corridors, and back-of-house areas where scene logic respects quiet hours and code-compliant egress.
High-bay zones with wireless occupancy groups that dim rather than drop, keeping forklift aisles safe and energy bills honest.
Fixture-and-control families specified once and repeated across 20+ properties without ad-hoc variants in every store.
Common-area scheduling and unit-side wiring devices in one specification, so inspections and handover stay on schedule.
Program snapshots described in the language procurement teams, MEP engineers, and controls contractors actually use.
Decora Smart wifi dimmers and occupancy-ready switches provisioned through My Leviton, commissioned in a single weekend per floor without opening the tenant ceiling grid.
0-10V high-bay dimming groups tied to wireless occupancy nodes reduced overnight draw while preserving safety-critical lux levels inside pick aisles.
One Leviton wiring-device and controls spec repeated across 62 sites so the owner kept a single approved submittal package and one service partner.
Tell the Leviton project desk the floors, protocols, and commissioning window. We will walk back the right mix of wifi dimmers, motion sensor switches, drivers, and wiring devices before procurement pressure lands.